This new version has the following features compared to the first version of the HOME family: this protective superstructure, which is designed for over-exposed areas (such as table desks), has been built on a new basis of chemical construction. Here too, the contact angle of water repellency exceeded 100 °. Significantly improved adhesion, excellent resistance to scale formation and sedimentation. Easier cleaning and removal of dirt.
Nanotechnology Nano Superstructure Cover is a specially developed polish with antibacterial effect for even stronger surface protection. It works exclusively as the final phase of the Nano Protect Wood, Nano Protect Stone, Nano Protect Plastic, and Nano Protect Ceramic & Sanitary coats already applied after curing. It is highly hydrophobic and its surface may be more slippery in the presence of water. It has a long-term effect on absorbent materials within the structure of wood, stone and concrete. On non-absorbent materials it acts on the surface. Its composition ensures a significant final surface hardening and therefore greater resistance to abrasion and UV protection, causing color fading. Its antibacterial effect prevents the bacteria from growing on the surface. The treated surface is less dirty, cleaner and more washable, with no different molds and bacterial cultures growing on its surface. We recommend renewing after the next year by applying a second layer, even double the internal use.
The total area to which protection is sufficient is 10 m2.
Instructions for use
Shake the preparation thoroughly before use. Apply to Nano Protect Wood, Nano Protect Stone, Nano Protect Plastic and Nano Protect Ceramic & Sanitary Surfaces. Apply in a small amount using a non-absorbent cloth (from the Pikatec accessory, do not use the sponge!) And then lightly spread evenly so that the fabric is poured into the surface structure. Do not use the product well on medium and very rough materials, and then it may not be possible to spread it.
After spraying, let it work for about 1 hour if you want to apply one layer (apply the second layer is not necessary). Prior to applying the second layer, the first layer must be dried on a surface and must not stick to the touch. Apply and spread the second coat very gently to avoid damaging the previous layer or apply it after several hours (the second layer has a significantly lower consumption).
The next phase is polymerization, when the Nano Superstructure Cover cure approximately 12 hours after the final layer has melted and has final strength, elasticity and hydrophobicity.
When using our appliance, you need to ventilate well.