Nano Clean Stone is used to clean and degrease stones, concrete and other unglazed materials before applying Nano Protect Stone.
The consumption of the product is approximately 10-30 m2.
Instructions for use
Determine the preparation according to the degree of contamination and porosity of the material in a ratio of 1: 5 to 1:15 (one part of the composition and x parts of water). For example, in the jet cleaning process, a larger dilution ratio is sufficient. For extremely polluted porous stones, use a clean Nano Clean Stone concentrate. Apply a sponge (on rough surfaces by spraying with a gun or using a spray gun or brush) and allow it to work for about 20-40 minutes. Strong and long-term soiled stones can be cleaned with a brush. Then rinse thoroughly with rinsing or pressurized water. If necessary, repeat the procedure.
After thorough drying, the surface is ready to apply Nano Protect Stone.