This new version has the following features compared to the first version of the HOME family: a new chemical structure that managed to exceed the contact angle of water repulsion over the 100 ° limit. Significantly improved adhesion, excellent resistance to scale formation and sedimentation.
Nanotechnological hydrophobic protection. On the surface of the glass, it reduces the adhesion of dirt and repels water. After application, it has a lifetime of up to one year. The nanoparticles (billionths of a meter) contained in this product create an invisible transparent layer on the surface of the glass. It is a kind of hard shield that penetrates the pores of the glass and smoothes its surface. As a result, dirt can not get into the pores because the treated surface does not allow good adhesion. In addition, the Nano Protect Glass treated surface gets higher hardness and the flying objects slightly bounce off the nano-screen to avoid long scratches and scratches. Organic residues (eg bird droppings) do not damage the treated glass surface. This hydrophobic agent works on the principle of lotus effect. When contacted with water, water drops from the surface are strongly repelled by gravity or air flow. Dripping water removes particles of dirt from the surface of the glass that had previously been adhered there. In the rain, therefore, the self-cleaning effect of the glass occurs.
The total area to which protection is sufficient is 30 m2.
Instructions for use:
Shake well before use! Do not apply in direct sunlight or in the rain! Apply only to a very clean and grease-free surface that is scalded, rinsed with warm water and dried! The glass surface must be degreased with Nano Clear Glass. Apply Nano Protect Glass to the surface of the glass using a non-absorbent application cloth. Leave for 5 minutes to dry. After this time, we polish the surface to a high gloss with a polishing cloth. It is important to polish the glass at an interval of 5 - 10 minutes. Polishing before and after the specified time is inappropriate. In the case of splashing problems, the glass can be lightly sprayed with Nano Clear Glass and polish it with a dry polishing cloth. It should be borne in mind that the glass protection product is scarred considerably worse than the other Piccatc Policies. However, the results are uncompromising and the final features are definitely worth it. If Nano Clear Glass is used to aid in blurring, there is no need to worry about the deterioration of the resulting properties.
After 90 minutes, the surface may be exposed to direct sunlight, water, and frost to -5 ° C when it is fully cured. For perfect curing, it is not advisable to expose the surface for extreme weather conditions (torrential rain, temperatures below -5 ° C or above 30 ° C) for at least 12 hours.
The optimal polishing effect and hardness occurs after 12 hours when the nanoparticles settle on the surface to form a shield (crystalline grid). When setting at low temperatures, the final cure time is slightly longer.
In the event of poor surface preparation, it may reduce performance, reduce functionality or reduce the life of the product. For perfect preparation, it is appropriate to polish the glass with a dry, clean cloth (for example, when dried water drops on the glass). Applying and then polishing the polish, you would have "stained" them in the politra and then it would be very difficult to get rid of them. On the glass, these undesirable effects would be particularly unpleasant. Do not apply in direct sunlight!
Application Simplification Tip: Long-term experience and feedback brings us with recommendations on how to apply these shields correctly and effortlessly. Everything is done as in the operating instructions. For spraying only, it is advisable to apply (spraying) lightly onto the Nano Clear Glass cloth and then lightly scatter the surface to a high gloss that is slightly surface-dyed. Do not push on the cloth, it is better to move the cloth 4 times a lot easier than once. It could be that with a heavy pressure on the cloth when scrubbing, you could still polish softly from the surface, and its functionality could be worse. In addition, you are significantly less upset. All this and then let the hardened polish harden as directed.