This new version has the following features compared to the first version of the HOME family: a new chemical structure that managed to exceed the contact angle of water repulsion over the 100 ° limit. Significantly improved adhesion, excellent resistance to scale formation and sedimentation. Easier cleaning and removal of dirt.
A device developed specifically for glass-ceramic products. It resists extreme temperatures (over 800 ° C) and significantly reduces the friction of grease, soot and dirt on the glass. Subsequent cleaning and maintenance of such glass and ceramics is very easy and fast. A revolutionary recipe for nanotechnology, which creates an invisible transparent layer of nanoparticles (billionths of a meter) on the lacquered surface, a kind of hard shield. It penetrates into the pores of the varnish structure and closes it, protecting it from the surface. Smooths its surface and, thanks to the presence of hard oxide nanoparticles, it strengthens it. It has a long-lasting effect of 6-12 months (according to the frequency of use of cooking equipment), ensures high gloss, protection against scratches from small impurities and dust, protection from salt influences, chemicals and various detergents. Apply polish only to surfaces that are pre-washed and cleaned.
The total area that protection is sufficient is 8 square meters.
Instructions for use
Shake well before use! Since it is nanotechnology, apply only a small amount of the tool, otherwise you only wipe the rest in the subsequent deco. On a thoroughly clean and degreased surface, preferably finished with Nano Clear Glass, spread evenly, preferably with a non-absorbent cloth for visible film. Allow about 30 minutes to dry when the film lightly lightens and polish it to a high gloss. Do not apply in direct sunlight, but after 90 minutes you can expose the surface to direct sunlight. After such treatment, it also resists water. The polishing solids from above, so under the hardening top layer there is still a soft lower part of the polish for 12 hours.
The optimal protective effect and hardness occurs after 12 hours when the nanoparticles settle on the surface to form a shield (crystalline grid). During this time, a very thin layer of very slightly visible powder that is not water repellent and which can be washed with a damp cloth is eliminated. This glass should be wiped thoroughly with a damp cloth after curing to prevent the expelled emulsifier from sticking to the politra!
Application Simplification Tip: Long-term experience and feedback brings us with recommendations on how to apply these shields correctly and effortlessly. Everything is done as in the operating instructions. For spraying only, it is advisable to apply (spraying) lightly onto the Nano Clear Glass cloth and then lightly scatter the surface to a high gloss that is slightly surface-dyed. Do not push on the cloth, it is better to move the cloth 4 times a lot easier than once. It could be that with a heavy pressure on the cloth when scrubbing, you could still polish softly from the surface, and its functionality could be worse. In addition, you are significantly less upset. All this and then let the hardened polish harden as directed.